Skip to main content

Architect Inspector

Architect Inspector - Architectural Inspector  About the job General Description of Role and Responsibilities as an Architect Inspector.  Architect Inspector - Quality Inspector Review approved architectural drawings, specifications, material submittals, and method statements prior to execution on site. Conduct daily inspections of architectural and finishing works for villa construction projects. Monitor construction activities including blockwork, plastering, screeding, waterproofing, tiling, marble works, ceilings, painting, façade finishes, joinery, aluminum works, and landscaping interfaces. Ensure compliance with approved drawings, project specifications, quality standards, and local authority regulations. Participate in mock-up inspections and ensure approvals prior to proceeding with bulk finishing works. Coordinate with Structural and MEP Inspectors to ensure proper sequencing and integration of architectural finishes. Monitor contractor performance with respect to ap...
Post a Comment

Specification For Portland Cement

 

Specification for Portland Cement

Ten types of Portland Cement as per ASTM C-150

1. Type I—For use when the special properties specified for any other type are not required.

2. Type IA—Air-entraining cement for the same uses as Type I, where air-entrainment is desired.

3. Type II—For general use, more especially when moderate sulfate resistance is desired.

4. Type IIA—Air-entraining cement for the same uses as Type II, where air-entrainment is desired.

5. Type II(MH)—For general use, more especially when moderate heat of hydration and moderate sulfate resistance is desired.

6. Type II(MH)A—Air-entraining cement for the same uses as Type II(MH), where air-entrainment is desired.

7. Type III—For use when high early strength is desired.

8. Type IIIA—Air-entraining cement for the same use as Type III, where air-entrainment is desired.

9. Type IV—For use when a low heat of hydration is desired.

10. Type V—For use when high sulfate resistance is desired.

Labels:

Comments

Post a Comment

Thanks for the comments and Visiting the blog, If you need more info please let me know.

Popular posts from this blog

SAES - Saudi Aramco Engineering Standards

SAES - Saudi Aramco Engineering Standards Engineering Standards For QA/QC Civil Engineer/Inspector. Under this, all SAES is helpful for QA/QC Civil Engineer/Inspector during QA/QC Civil Interview.  SAES-A-114     Excavation and Backfill  SAES-Q-001     Criteria for Design and Construction of Concrete Structures SAES-Q-004     Installation of Piles and Conductors for Offshore Structures SAES-Q-005     Concrete Foundations  SAES-Q-006     Asphalt Concrete Paving   SAES-Q-007     Foundations and Supporting Structures for Heavy Machinery SAES-Q-009     Concrete Retaining Walls SAES-Q-010     Cement-Based, Non-Shrink Grout for Structural and Equipment Grouting SAES-Q-011     Epoxy Grout for Machinery Support SAES-Q-012     Criteria for Design and Construction of Precast and Prestressed Concr...
4 comments
Read more